- Joined
- Sep 15, 2025
- Messages
- 968
Most loader equipment accidents can be avoided by following simple safety precautions.These safety precautions, iffollowed at all times, will help you operate your loader safely.1. BEFORE OPERATING THE LOADER1. Read and understand all instructions and precautionsfound in both the tractor and the loader operator'smanuals before using the loader.Lack of knowledge can lead to accidents.2. It is the owner's responsibility to ensure that anyonewho will operate the loader reads this manual first andbecomes familiar with the safe operation of the loader.3. For your safety, a ROPS with a seat belt is stronglyrecommended by KUBOTA in almost all applications.If your tractor has a foldable ROPS, fold it down onlywhen absolutely necessary and raise it up and lock itagain as soon as possible. Do not wear the seat beltwhen a foldable ROPS is down or a fixed ROPS isremoved. Ifyou have any questions, consult your localKUBOTA dealer.Always use the seat belt when the tractor is equippedwith a ROPS. Never use the seat belt when the tractoris not equipped with a ROPS.4. Visually check for hydraulic leaks and broken, missing,or malfunctioning parts.Make necessary repairs before operating.5. Replace damaged or illegible safety labels. Seefollowing pages for required labels.6. When the front loader is mounted on the tractor, enterand exit the operator's seat only from left side of thetractor.7. Engage the loader control valve lock to preventaccidental actuation when the implement is not in useor during transport. Do not utilize the valve lock formachine maintenance or repair.8. Assemble, remove and reinstall the loader only asdirected in this manual. Failure to do this could resultin serious personal injury or death.9. Follow the precautions below when attachingattachments.• Make sure both handles (LH, RH) contact the earplates at the points (A) and are all the way down.• Make sure both lock pins (LH, RH) protrude throughthe pin slots.• Kubota recommends the use of Kubota attachmentson Kubota loaders. Non-Kubota attachments, if used,must comply with ISO 24410, first edition 2005-04-15.• Use of a non-Kubota attachment that does not complywith ISO 24410 or the improper positioning ofhandle(s) or non-protrusion of pin(s) may result indetachment of the attachment or deformation, causingloss of performance, personal injury or death.1AIABDDAP015A(1) Handle(2) Ear plate(3)
