Yesterday at 5:32 PM My Z724 Zero won't crank. I checked the seat, brake, & PTO safety switches all work. I can jump start the starter and it runs

[Debbie Williams]

Yesterday at 5:32 PM
My Z724 Zero won't crank. I checked the seat, brake, & PTO safety switches all work. I can jump start the starter and it will run. Will not start with the key. There is power coming out of the ignition switch, but doesn't make it to the starter. Any suggestions?

 

[h1ck0ry.b]

Since you've got power from the key switch but it's not hitting the solenoid, my first thought is to trace the wire from the ignition switch and check the wiring harness around the frame, particularly where it might rub or be exposed to moisture or vibration. Look for a main wiring connector that might have gotten corroded or loose. It's often that last relay or the wire going from the relay to the solenoid that's the weak link!