I have a 2000 BX2200. New battery, new alternator, new starter. It's as if I have a power drain even though I've confirmed the alternator is generating. Fully charged battery, mowed for 3 hours, shut it off and instantly attempted to start it. Dash lights come on but nothing happening at the starter. Not even a click. Put jump pack on, glow plugs click and it'll fire right up. Thanks for any assistance.
Tractor won't start after use
- Thread starter lwmsgm
- Start date
TractORange
Well-known member
- Joined
- Sep 18, 2025
- Messages
- 51
Sounds like your starter circuit's got some resistance. Could be a bad ground, rusty terminals, or a faulty solenoid. Check the voltage drop on the starter relay and clean up all those connections, especially where it grounds to the frame.
FieldFixer
Well-known member
- Joined
- Apr 23, 2025
- Messages
- 76
Besides looking at the starter circuit, take a moment to check the ignition switch for any worn contacts. Make sure to also verify all safety interlocks, such as the seat, PTO, and brake. Additionally, it’s important to test the battery cables for internal corrosion or any voltage drop while cranking.
