Kubota ZD25 deck stuck in the up position

[Masked+Man]

A bit of a problem with my 2007 Kubota ZD25. I recently removed the deck to replace the spindle bearings and raised the lift arms for clearance. Now that I've reinstalled the deck, I can't get the lift arms to lower back down. The pump is running and seems to be working, but the arms just won't budge. Any ideas on what might be causing this?

 

[Monkey7Mind]

Try this: to get the mower as low as possible, turn the height knob to the lowest setting. You might still need to use a pry bar to get the links down while holding the lift lever in the "lower" position. Let me know if that works and good luck!